EZ-Guide® Plus
Troubleshooting
Problem
Possible
cause
Solution
Screen is blank or
Backlight is off
Turn on the cab light, then use Brightness/Contrast to turn
hard to see
the backlight on.
Backlight level needs to
Use Brightness/Contrast screen to change the brightness.
be
adjusted
The lightbar has locked
Disconnect power, wait 30 seconds, and then reapply power. Up
Contrast is wrong
Press and hold o as you reapply power.
Contrast is reset to the default value.
No power
Make sure that the lightbar is connected to a power source.
I need to reset the
You have mapped the
Press u to select the A icon and then press o to reset Point A.
start of the first swath. Start of the first swath at
the wrong time
My lightbar LEDs,
There is a fault with the
Run hardware tests. From the Lightbar menu, select Tests. buttons, or
screen
hardware
Run any or all of the tests. If any of the tests fail, contact
do not appear to be
your local reseller for information on repairing or replacing
working properly
the lightbar.
NO GPS COMMS
The lightbar is notThe GPS receiver or lightbar is faulty.
communicating with the
Contact your local reseller for information about repairing integrated
GPS receiver
or replacing the faulty item.
NO GPS POSITIONS
The antenna is not
Connect the antenna to the lightbar or to the external GPS
message flashes on
connected to the lightbar receiver. See Installing the System, page 2.
Screen
The antenna, antenna
From the configuration menu, select GPS /
cable, or GPS antenna
Diagnostics.
connection is faulty
Press u. If the Antenna Feed option displays
None, there is a problem with the antenna, antenna cable,
or the GPS antenna connection. Contact your local reseller for
information about repairing or replacing the faulty item.
27
Summary of Contents for EZ-Guide Plus
Page 30: ...EZ Guide Plus 30 ...