GB 05 02 02 MA
Sprayer setup
Contr
Contr
Contr
Contr
Control bo
ol bo
ol bo
ol bo
ol boxxxxxes and pow
es and pow
es and pow
es and pow
es and power supply
er supply
er supply
er supply
er supply
Contr
Contr
Contr
Contr
Control bo
ol bo
ol bo
ol bo
ol boxxxxxes
es
es
es
es
Control boxes are fitted in the tractor cabin at a conven-
ient place. Tapping screws can be used for mounting.
Power supply
Power requirement is 12V DC. Note polarity!
The wires must have a cross sectional area of at least
4.0 mm to ensure a sufficient power supply. For the EVC
operating unit the tractor circuit should have an 8 Amp
fuse
Control box
Polarity (wire colour)
Fuse (Amp)
Po
Negative -
EVC control unit
Brown
Blue
8
T102-0022
Gener
Gener
Gener
Gener
General inf
al inf
al inf
al inf
al informa
orma
orma
orma
ormation
tion
tion
tion
tion
Ensure that snap couplers are clean before connection!
NOTE!
The hydraulic system requires a minimum
oil pressure of 100 bar and an oil capacity of
approx. 2 litres.
After having operated the boom and the system has
been filled with oil, check tractor’s hydraulic oil level and
top up if necessary.
Saf
Saf
Saf
Saf
Safety inf
ety inf
ety inf
ety inf
ety informa
orma
orma
orma
ormation
tion
tion
tion
tion
WARNING!
Test of the hydraulic system should
be done very cautiously. There may be air trapped
in the system which can cause violent move-
ments of the boom.
WARNING!
Hydraulic leaks. Never use your
fingers to locate a leakage in any part of the
hydraulic system. Due to high pressure, hydraulic
oil may penetrate the skin.