6 - Maintenance
127
10 Hours Service - EasyClean Filter
This filter has a clogging indicator, but even if this indicator does not
show clogging, the filter mostly needs cleaning every 10 hours.
Servicing the filter
1.
Turn the filter lid counter-clockwise to open it.
2.
Remove lid and filter from the filter housing.
3.
Separate filter element from lid/filter guide by turning locks (A)
outwards.
4.
Clean filter and if necessary clean the housing for larger impurities.
To reassemble
1.
Grease the O-ring on the filter lid.
2.
Press the filter onto the filter guide/lid. Make sure that it has caught
the guide. Locks (A) are turned inwards.
3.
Reassemble filter/filter lid into the housing. Make sure that it has
caught the guide in the bottom of the housing.
4.
Turn the filter lid clockwise to close it.
±
WARNING! Always wear protective clothing and gloves before
servicing the filter!
ATTENTION! If you have difficulties with opening the filter, there is another way to handle it.
See “Emergency Operation - EasyClean Filter” on page 193.
Summary of Contents for MEGA VPZ MASTER
