3 - Description
1. 16
Axles
Axle options for the MERCURY COVAMAX are either in the form of a straight axle or a stepped axle and vary
depending on sprayer size.
The straight axle is adjustable for track width and for placement forward and aft on the sprayer.
The stepped axle provides the same adjust ability as the straight
axle but with the stepped axle further changes to ride height can be made with the repositioning of the axle to
enable higher ground clearance if desired.
Track Adjustment
€
DANGER: Raise the mistblower frame and prevent it from moving. Carry out this operation with empty tanks.
•
Loosen the nuts and bolts on the axle housing.
•
Extend the half-axle to the desired length without exceeding the maximum.
•
Tighten the nuts and bolts again until the half-axle is sufficiently secured.
•
Make sure that the two axles have been lengthened to the same amount in reference to the centreline of
the sprayer.
The half-axles are mounted in a housing that
is bolted to the frame. This has five different
settings to improve the stability of the
machine when necessary.
In order to obtain a wider track gauge or
greater stability on sloping terrain it is
possible to lengthen the half-axles of the
HARDI MERCURY mistblower on all its
versions.
STANDARD BRAKED
STANDARD
STEPPED BRAKED
STEPPED
Summary of Contents for Mercury Covamax series
