4 - Set-Up
4. 6
Connecting Hydraulics
The hydraulic hoses supplied with your mistblower will vary depending on the options you have fitted. As a
standard there will be six hydraulic hoses supplied, two will control the boom lift function and four for the
independent boom fold functions. There is also the possibility of a further four hoses that control hydraulic tilt
function if it has been fitted to your machine.
If Electric over Hydraulic (EOH) Tilt is fitted as an option, the supplied number of hydraulic hoses is reduced to only
four hoses, two hoses control the boom lift function and two supply the EOH hydraulic manifold, the EOH
switchbox controls operate the independent boom fold and tilt operations through electronic control of hydraulic
solenoids.
Connect the required hoses into the hydraulic outlets on the rear of your tractor. The cylinders used for lift, fold and
tilt features all require double acting hydraulic outlets.
Hydraulics hoses are marked for identifying which hoses are for
which function. They are generally labelled with either named tags
(lift/fold/etc) or have different coloured cable ties attached to the
hoses as shown. For each cylinder one hose connects to the
pressure line (P) and the other connects to the tank line (T).
Summary of Contents for Mercury Covamax series
