8
HARDI
®
New NAVIGATOR OPERATOR’S MANUAL
Sprayer Setup
Connection
Connect the sprayer to the tractor, adjusting the hitch
mounting height (
A
Fig. 1) on the drawbar so that the
sprayer is level.
WARNING!
The drawbar bolts must be re-tight-
ened to the specifi ed torque every 8 hours of
work until the torque is stabilized, and then at
intervals stated in the service scheme (p. 34).
WARNING!
Ensure the drawbar is secured to
the trac tor and cannot be accidentally dis con -
nect ed. Safety chains are recommended when
towing the spray er.
WARNING!
Your tractor will have de creased
braking effi ciency with the sprayer connected,
particularly when the tank is full.
Support jack
To remove support jack (
B
Fig. 1): lift leg, remove
se cur ing pin and pull out support jack. When sprayer
is attached to the tractor, support jack is stored in a
brack et on the left side of the frame (
Fig. 2).
WARNING!
The support jack is not designed
for lifting a full sprayer or sup port ing the trailer
for extended periods if the sprayer is full of
water.
Bottom step (optional)
To access the front platform, pull the step lock pin out
and lower the step (
Fig. 3). Always lift up and push the
step in to the locked position before driving. The step
will lock au to mat i cal ly when it is lifted up.
WARNING!
Ensure the molded steps on the
Flush Tank are kept clear of mud and debris to
optimize their slip-resistant properties.
WARNING!
Always ensure the Flush Tank tie-
down strap is secured before moving spray er or
climb ing onto steps (
Fig. 4).
Tie-down strap in secured position.
Fig. 2
Fig. 4
Fig. 3
LOCK PIN
LOCK PIN
Fig. 1
B
A
Summary of Contents for New NAVIGATOR 1100
