5 - Operation
68
External Filling Device
The External Filling Device is operated as follows:
1.
Remove cover and connect suction hose to the suction manifold.
2.
Turn pressure valve to ”Spraying”, and the blue return valve to
”Agitation”.
3.
Turn suction valve to RinseTank.
4.
Turn handle on External Filling Device valve towards Filling Device.
5.
Engage diaphragm pump and set PTO revolutions at 540 rpm.
6.
The tank is now filled with water. Keep an eye on the liquid level
indicator.
7.
Turn handle on suction manifold away from Filling Device to
discontinue filling process. Now disengage the pump. Disconnect
suction hose and replace cover.
€
DANGER! Prevent contamination or injury. Do not open suction
valve towards Filling Device, unless the pump is running and the
filling hose is connected. If this valve is opened without the pump
running, liquid will stream out of the coupler.
±
WARNING! Do not leave the sprayer while filling the tank, and
keep an eye on the level indicator in order NOT to overfill the
tank.
μ
ATTENTION! Observe local legislation regarding use of filling
device. In some areas, it is prohibited to fill from open water
reservoirs (lakes, rivers etc.). It is strongly recommended only to fill
from closed reservoirs (mobile water tanks etc.) to prevent
contamination.
Summary of Contents for NK SB Series
