3 - Description
17
Air equipment
Axial fan – Technical information
The fans on HARDI ZEBRA mistblowers have been designed with composite blades and their aerodynamic design offer a
higher quantity and better distribution of air, less noise and less power consumption.
€
DANGER! NEVER exceed 540 rpm at the tractor PTO. Exceeding
540 rpm may cause severe damages to the fan and lead to severe
injuries or death!
€
DANGER! Keep away from the air inlets and outlets while the fan
is operating. Foreign objects may be expelled from the air outlet
or a piece of cloth could be sucked into the air inlet. Risk of severe
personal injury or death!
The air kits are the most dangerous part of the machine. Do not repair,
change or modify any of the parts but leave this to your HARDI dealer.
Any repair jobs on air kits in requires qualified technicians.
Protection grids
On all axial air kit models protection grids are fitted. They are
fundamental for avoiding accidents and stopping foreign objects from
entering the fan.
A.
Air inlet protection grid
B.
Air outlet protection grid
€
DANGER! Use of the air kit without protection grids is not
permitted.
€
DANGER! Do not take the protection grids off the equipment
whilst it is in use.
€
DANGER! Do not go near the fan when the equipment is in use if
you are wearing light or loose clothing.
€
DANGER! Never put foreign bodies inside the fan via the grid,
regardless of whether it is in use or not.
€
DANGER! Protect your hearing from fan noise by wearing EN 352-
1:1992 homologated ear muffs or something similar.
€
DANGER! If you were to notice vibrations or abnormal noise,
switch off the fan immediately.
Summary of Contents for ZEBRA ATLAS
