HARDY MANUFACTURING CO., INC (MODEL KB165) PAGE 28
Section IX
Appendix
9-1
TROUBLE SHOOTING GUIDE
1. Verify that the two (2) holes in the grates are open.
2. Make sure that the holes in the air tube located across the rear of the fire box are
open and unrestricted.
3. Open the ash door and empty the ashes in the ash drop.
4. Take out the turbulators in the top right side chamber of the heater and brush out
the tubes with the 1.75” flue brush provided.
5. Clean out the bottom left side chamber with the shovel provided.
6. Open the air volume box on the back of the heater and make sure that the top and
bottom air inlets are clear of any creosote.
7. Verify that the dampers and blower are operating properly.
Improper Burning
Summary of Contents for KB165
Page 2: ...THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 6: ... MODEL KB165 iv THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 12: ......
Page 64: ...THIS PAGE INTENTIONALLY LEFT BLANK ...