７
3.2 Install the outer lock with square spindle
1.Select the suitable
square spindle
that
fit your door thickness. (shorter :
35~45mm; longer: 45~55mm)
2.Find the little pin in the accessories bag.
Install the square spindle, t
hrough the
little hole with the pin to fixed the
spindle on the outer lock and Bend the
bottom of the little pin to hold it in
place
. (Please be sure align the position of
the little hole)
3.3 Get the metal plate
1. Find the
inner lock
and take off the
battery cover.
2. Remove these 3 screws.
3.Get the metal plate and PVC
sheet(Numbered 10 and 6 on the page 5
Overview).
3.4 Install the outer lock
Let the data cable goes on the top of
latch. Make sure the square
spindle
and 2
screws pillar through the latch holes.
