my
HARGRAY
DVR
USER GUIDE
URC PLUS supports both RF and IR signals. You need to follow below procedures to
program the URC PLUS to IR mode before controlling Set Top Box.
1.
On the URC PLUS, press and hold the
STB
button for approx. 5 seconds. The
STB
button backlight will illuminate. Now the URC PLUS is in registration mode.
2.
On the URC PLUS, press
STB
once again. Both the
STB
and
AUX
button backlight
will illuminate.
3.
Press
0
to set URC PLUS to IR mode only. The URC PLUS will not send
any RF signal.
The
STB
button backlight on the URC PLUS will blink twice to indicate that the
setting was successful.
Pressing a key other than
0
or a button is not pressed within 10 seconds,
the
STB
backlight will extinguish and the URC PLUS registration process
will be terminated.
33