my
HARGRAY
DVR
USER GUIDE
Using user menu
To start the User Menu:
1.
Press
INPUT
and then
MENU
in sequence within 1 second.
To set up a Feature:
1.
Use remote control
UP
and
DOWN
arrow to select the feature you want to set.
The selected feature will be highlighted by a red rectangle.
2.
Press
OK
, the feature will be highlighted in navy blue color.
3.
Use remote control
UP
and
DOWN
arrow to loop through available choices.
4.
Press
OK
again when your choice is selected.
5.
If you have other features to set up, repeat the above procedures.
To Save your setup or Exit:
1.
If you have made any setup and want to save the settings, select
SUBMIT
in the
User Menu. You will be notified the saving of your settings.
2.
Select
EXIT
to quit the User Menu.
ATTENTION:
If you exit the User Menu without doing the
SUBMIT
, your changes will
be lost and will not take effect.
NOTE:
If you want to give up the changes, simply select
EXIT
.
Pressing “INPUT” and “MENU”
in sequence within 1 second
37
