10
-Storing the Power Plate-
The Power Cord may be stored
inside the Power Plate. Wind the
Power Cord around the bottom of
the Power Plate three times and set
the end of the cord in the cutout.
Secure the cord firmly in the cutout
when in use and/or in storage.
Cutout
●
Check the following.
Troubleshooting
Problem
Cause
Solution
Power does not
turn on
Power cord is not
plugged in.
There is an insufficient
amount of water in the
kettle.
If you have any inquiries about the product, please contact customer
service (Please refer to “After Sales Service” on the back cover). It is
dangerous to disassemble or repair the product so please do not try to
attempt repairs on your own.
Pour more than 0.15L of
water into the kettle and
turn it on.
Push down on the lid until
it clicks into place.
The Power Kettle is used in a
location, such as near a window,
where it is exposed to wind.
Use the Power Kettle in
locations where it is not
directly exposed to wind.
The lid is not placed on
properly.
Make sure the Power Cord
is plugged all the way in.
Sensor of the protection
system is at high
temperature due to
repeated use.
Turn the power off and
let the Power Kettle
stand for a while before
turning it back on.
Automatic Power
Off does not
work.
Product Care
Inquiries about the product
