TOP PLATE OF FRONT WALL
Front View
STUDS
DIAGRAM 14.
Top plate of front wall.
STEP 5 CONTINUED: ASSEMBLE HOISTER SYSTEM
Front
Wall
Ceiling
DIAGRAM 13.
Avoid installing Welded Screw Eye above tall
shelves. Rope must point down to lock.
B. ATTACH PULLEYS
Place one Pulley (D) on each Pigtail Lag Screw (B).
ATTACH BLOCK AND TACKLE (G)
Attach Block and Tackle system (G) to welded Screw
Eye (A) with Shackle (C). Remove ring from shackle
like a key ring. Put pin through top of Cleat (G1).
Put ring back on to secure Shackle (C).
INSTALL WELDED SCREW EYE (A) ON FRONT WALL
Use stud finder to locate solid wood of top plate. Drill
7/32" (5.5 mm) hole. Screw Welded Screw Eye (A) into
top plate of front wall (near top of ceiling).
DIAGRAM 15.
Single black/red hoisting rope must face down.
*NOTE:
Appearance of Cleat (G1) varies by system size.
Refer to system part number for specific Block and
Tackle Cleat.
Shackle (C)
Single Black/Red
Hoisting Rope (F)
Block and Tackle Cleat (G1)*
7808
