13
Radial Winch
40.2 ST EL
Installation and Maintenance Manual - Mod.E
NOTICE
To connect motor, attach cable terminals to clamps
between nut and lock nut. Hold nut in contact with
motor using a spanner and tighten other nut with
second spanner. Take special care not to turn the
central spindles. These instructions apply when
assembling and disassembling. We recommend
using a torque wrench so as to obtain a torque equal
to and no greater than 10 Nm (88 in-lb).
NOTICE
Note that correct electrical contact sequence is:
Nut – Cable Terminal – Self-Locking Washer –
Lock Nut
