Installing Block
Printed in USA 4546/10-13
Keep your equipment clean and free-running by frequently flushing with fresh water.
Periodically clean with mild detergent and water solution. Spin sheaves to distribute
soap solution evenly. Occasionally disassemble and clean rollers and balls with
detergent and water solution. Assemble using Blue Loctite
®
on screws.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
Maintenance
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
WARNING! You must mount to solid deck construction using
specified fasteners in all mounting holes and nuts, washers
or backing plates to achieve correct maximum working load
to avoid a failure leading to an accident.
Make sure block bisects the angle as shown in block loading images on first
page. Take block apart, secure base to deck and assemble block per diagram.
Loctite
®
is a registered trademark of Henkel AG & Company KGaA
Installing Block
Printed in USA 4546/10-13
Keep your equipment clean and free-running by frequently flushing with fresh water.
Periodically clean with mild detergent and water solution. Spin sheaves to distribute
soap solution evenly. Occasionally disassemble and clean rollers and balls with
detergent and water solution. Assemble using Blue Loctite
®
on screws.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
Maintenance
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
WARNING! You must mount to solid deck construction using
specified fasteners in all mounting holes and nuts, washers
or backing plates to achieve correct maximum working load
to avoid a failure leading to an accident.
Make sure block bisects the angle as shown in block loading images on first
page. Take block apart, secure base to deck and assemble block per diagram.
Loctite
®
is a registered trademark of Henkel AG & Company KGaA
Installing Block
Printed
in
USA 4546 01/14
Keep your equipment clean and free-running by frequently flushing with fresh water.
Periodically clean with mild detergent and water solution. Spin sheaves to distribute
soap solution evenly. Occasionally disassemble and clean rollers and balls with
detergent and water solution. Assemble using Blue Loctite
®
on screws.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
Maintenance
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
WARNING! You must mount to solid deck construction using
specified fasteners in all mounting holes and nuts, washers
or backing plates to achieve correct maximum working load
to avoid a failure leading to an accident.
Make sure block bisects the angle as shown in block loading images on first
page. Take block apart, secure base to deck and assemble block per diagram.
Loctite
®
is a registered trademark of Henkel AG & Company KGaA
Installing Block
Printed
in
USA 4546 01/14
Keep your equipment clean and free-running by frequently flushing with fresh water.
Periodically clean with mild detergent and water solution. Spin sheaves to distribute
soap solution evenly. Occasionally disassemble and clean rollers and balls with
detergent and water solution. Assemble using Blue Loctite
®
on screws.
IMPORTANT! Exposure to some teak cleaners and other caustic solutions can
result in discoloration of part and is not covered under the Harken warranty.
Maintenance
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
WARNING! You must mount to solid deck construction using
specified fasteners in all mounting holes and nuts, washers
or backing plates to achieve correct maximum working load
to avoid a failure leading to an accident.
Make sure block bisects the angle as shown in block loading images on first
page. Take block apart, secure base to deck and assemble block per diagram.
Loctite
®
is a registered trademark of Henkel AG & Company KGaA
