32
CLR Mooring Winch
Installation and Maintenance Manual - Mod.A
FUSE 1A
LED
Battery
LIGHT SWITCH
NOT PROVIDED BY HARKEN
8.6 Led lights - Electric wiring diagrams
NOTE!
The cabling of the led lights sytem must be done taking into account the following data:
Voltage range: 10-30V
Current absortion: 150mA
8.7 Hydraulic connections diagrams
The hydraulic motor must be connected to a hydraulic system using two high-pressure tubes which
serve for input or output according to the direction in which the motor will be run. The motor also
needs a third connection with a low pressure tube for drainage, so that excess oil can return to the
main tank to avoid shortening the life of the motor. This motor uses a closed centre valve.
For the hydraulic motor ports size refer to the Outline section of this manual.
