Harken HighTailer IN171 Product Manual Download

Page: 13 / 16

ENGLISH

07/2022

Foot pedal operation:

- Perform a load test in gear based on the amount of

weight being lifted.

- Select gear, lift at least 10 ft. Stop and lower load.

NOTE: Assess if the load is descending at an appropriate

rate, and adjust number of wraps on winch to optimize.

- The foot pedal is a remote on/off switch and does not

have speed control functionality.

INCORRECT USES:

NEVER

allow rope

pass outside of the
line drive pigtail.

NEVER

allow rope

to override (overlap)
on winch drum.

NEVER

wind rope

around the winch drum
in a counterclockwise
direction.

NEVER

let rope pass

under the stripper arm.

WARNING!

ENSURE CORRECT PLACEMENT OF THE ROPE ON

THE STRIPPER ARM AND INTO THE SPRING LOADED

SELF-TAILING JAWS.

IN171_HighTailer.MANUAL.PROD.indd 13

6/30/2022 1:47:21 PM

Summary of Contents for HighTailer IN171

















Search results

Summary of Contents for HighTailer IN171

Reviews:

Related manuals for HighTailer IN171

Brands by name

Popular brands

Harken HighTailer IN171, Product Manual

Search results

Summary of Contents for HighTailer IN171

Reviews:

Related manuals for HighTailer IN171

Brands by name

Popular brands