Harken HighTailer IN171 Product Manual Download

Page: 16 / 16

ENGLISH

07/2022

262-691-3320

harkenindustrial.com
infoUSA@harkenindustrial.com

Harken, Inc.

N15W24983 Bluemound Rd.
Pewaukee, WI, 53072

WARRANTY

Harken Industrial guarantees this product for three years against

any defects in materials or manufacture. The guarantee does

not cover this product from normal wear and tear, oxidation,

modification or alteration, incorrect use or storage, poor

maintenance, accidental damage, negligence or any usage

for which the product was not designed.

See full warranty at harkenindustrial.com.

RECORDS

12-MONTH INSPECTION LEDGER

Customer

Model #:

Serial #:

Purchase date:

Date first put into use:

Date of
inspection/repair:

Date of next
inspection:

Description of the inspection/repair:

Name and signature of the
inspector/maintenance operator:

IN171_HighTailer.MANUAL.PROD.indd 16

6/30/2022 1:47:26 PM

Summary of Contents for HighTailer IN171

















Search results

Summary of Contents for HighTailer IN171

Reviews:

Related manuals for HighTailer IN171

Brands by name

Popular brands

Harken HighTailer IN171, Product Manual

Search results

Summary of Contents for HighTailer IN171

Reviews:

Related manuals for HighTailer IN171

Brands by name

Popular brands