9
ENGLISH
05/15/2022
Minimum breaking strenght (MBS)
The Minimum Breaking Strength (MBS) of the
Winch LokHead 500 KIT.US is 22kN.
Maximum working load (MWL)
The Max Working Load (MWL) of the Winch LokHead
500 KIT.US is:
1102 lb (500 kg) for lifting loads
485 lb (220 kg) for lifting person in rescue operation
Rope Requirements
Technical Data
Rope
7/16"-
1/2"
(11 mm-12.5 mm)
Minimum Breaking Strength (MBS)
22kN
Max Working Load
500 kg (1102 lb) - lifting loads
220 kg (485 lb) - lifting person in rescue operation
Power Ratio
13,50:1 - 1
st
speed / 39.90:1 - 2
nd
speed
Gear Ratio
2,13:1 - 1
st
speed / 6.28:1 - 2
nd
speed
Winch Weight
9.25 lb (4.2 kg)
Winch Handle Weight
1.10 lb (0.5 kg)
Plate + Plate Adapter Weight
6.17 lb (2.8 kg)
Tripod Adapter
4.85 lb (2.2 kg)
Winch Dimensions
12.24" x Ø6.18" (311 x Ø157 mm )
Recommended working temperature range
-4° F to +122° F (-20°C +50°C)
WARNING!
DO NOT APPLY A LOAD GREATER THAN THE MAX
WORKING LOAD (MWL) TO THE WINCH LOKHEAD
500KIT.US
WARNING!
FOR CORRECT MAINTENANCE OF ROPES CONSULT THE
ROPE USAGE MANUAL.
WARNING!
USE ONLY EN 1891 OR NFPA 2500 CERTIFIED
ROPES WITH A DIAMETER OF BETWEEN
7/16" - 1/2" (11 - 12.5 MM) FOR LIFTING PERSON.
WARNING!
DO NOT USE WITH WIRE ROPE.
WARNING!
USE ONLY ROPES IN GOOD CONDITION.
e
R
®
i
SM
A
Tolleranze per dimensioni lineari ed angolari prive di indicazione di tolleranza specifiche come da Tab. UNI EN 22768-1 -Classe di tolleranza Media.
Tolerance for linear and angular dimensions without individual tolerance indications as for standard sheet UNI EN 22768-1 -Tolerance class m.
Tolleranze geometriche per elementi privi di indicazione di tolleranze specifiche come da Tab. UNI EN 22768-2 - Classe di tolleranza K.
Geometrical tolerance for features without individual tolerance indications as for standard sheet UNI EN 22768-2 -Tolerance class K.
A - Modificato descrizione da 500KIT HL a 500.US e rimosso S721750020 e A97016100 (Baselli 31/01/2020)
B - Sostituito u-bolt (Baselli 04/11/2020)
Tolleranze generali per fori H13 UNI EN ISO 286-1
Holes general tolerance H13 UNI EN ISO 286-1
Tolleranze generali per alberi h13 UNI EN ISO 286-1
Shafts general tolerance h13 UNI EN ISO 286-1
La HARKEN SPA è proprietaria esclusiva di questo disegno e di tutte le informazioni in esso contenute. A norma di legge è vietata la riproduzione senza autorizzazione scritta rilasciata dalla HARKEN SPA.
HARKEN SPA is the sole owner of this drawning and of all included information. According to law it is forbidden to reproduce this drawing whithout a written authorization issued by HARKEN SPA
Smussi non quotati 0.2 x 45°.
All unmarked chamfers 0.2 x 45°.
Tutte le quote si riferiscono prima di eventuali
trattamenti superficiali
All dimensions refer to the moment previous to
surface treatments
Riferimento a specifiche Harken
Harken standard dependence
Raggi non quotati 0.5
All unmarked radii 0.5
Rompere spigoli vivi
Remove all sharpcorners
Q.ty
Code
Description
1
A97002700
Assy Plastic box with foam insert
1
A96910800W
Control lever assy
1
F83256700
Handle B10AL
POS.
QTY.
Code
Description
Weight (g)
1
1
A97035600
Assembly reversible plate LokHead 500KIT.US
2326.73
2
1
A97216400
Winch LokHead 500.US
4266.87
3
1
A97216500
Tripod adapter LokHead 500KIT.US
2291.07
B
B
Inclusi i seguenti codici non rappresentati:
Drawn
Note
Material
Description
Finish
Scale
Date
Filename
Rev.
Revision / Modification:
Mass [g]
0
10
20
30
40
50 [mm]
Code
C:\temp\
Mod.
Modelled
Checked
Date
Date
Surface [mm2]
ISO A2
Sheet format
872164
8884.68
1:2.5
Cazzaro
Baselli
04/11/2020
05/03/2019
Assieme Winch LokHead 500.US
Assembly Winch LokHead 500.US
0
F87216400
B
10
20
30
40
50
60
70
80
90
100 [mm]
F
E
C
D
A
B
5
6
7
8
3
4
1
2
11
10
9
12
G
H
B
E
C
F
G
A
D
Baselli
06/03/2019
48,50
262
203
262
323
120
310,50
