5
Performa
™
Winch
70.2 STP
Installation and Maintenance Manual
Procedure
To install the winch you must remove the drum and use Socket Head (SH) bolts or Hexagonal
Head (HH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Follow steps below only to install the winch using Socket Head (SH) bolts
1. Unscrew the central screw ( 2Nm/18 in-lb)
3. Unscrew the three screws n°26
( 4Nm/35 in-lb)
5. Lift off the drum n°23
2. Slide off the assy socket n°28 and the
cover n°27
4. Remove the stripper arm n°25
by rotating and lifting it.
Install the winch on the deck in the
position you have chosen, keeping in
mind the limits described on page 3.
(See paragraph on installation)
