5
Performa
™
Winch
40.2 STP
Installation and Maintenance Manual
Procedure
To install the winch you must remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 3. (See paragraph on installation)
1. Unscrew the central screw ( 2Nm/18 in-lb)
3. Unscrew the three screws n°24
( 4Nm/35 in-lb)
5. Lift off the drum n°21
2. Slide off the socket n°25 and the cover n°26
4. Remove the stripper arm n°28 by
rotating and lifting it.
