9
Performa
™
Winch
60.3 STP
Installation and Maintenance Manual - Mod.D
9. Unscrew the 6 hex screws n°17
( 20Nm/177 in-lb)
10. Slide out the drum housing n°16.
Attention! The gear assembly n°36 remains
inside the drum housing
11. Remove the gear n°29, pawls carrier n°31,
the bearings n°32 and 34 and the clutch
spring n°33.
Important: washer n°7 may remain inside
the drum support!
8. Slide out the central shaft n°19
7. Slide out the assy clutch n°35
12. Remove gear n°6, pawls carrier n°3 and
washer n°7
