7
Performa
™
Winch
60.3 STP EL/HY
Installation and Maintenance Manual - Mod.D
Installation procedure
To install the winch, remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 4 and using socket head (SH) bolts.
1. Pull out the disconnect rod n°37
2. Unscrew the central screw ( 2Nm/18 in-lb)
3. Slide off the assy socket n°29 and the
cover n°28
4. Unscrew the three screws n°27
( 4Nm/35 in-lb)
5. Remove the self-tailing arm n°26 by
rotating and lifting it.
6. Lift off the drum n°23