09-09-13
ENGLISH
37
powerseat pWrs-G.compact
5. Remove the strop from upper anchorage
point.
6. Fasten the strop on the lower anchorage
point.
When the device is dismantled, it is necessary to separate the parts in plastic, those in metal and electrical
components, which must be sent to differentiated disposal centres in accordance with the regulations of the
country where the device is dismantled.
dismantling and disposal
enGIne MAIntenAnce
For engine maintenance, consult the Engine Manual supplied together with this manual.
cleAnInG
Regularly clean and dry the device with a damp cloth to remove accumulated dirt. Do not use a direct jet of
water or a high pressure water jet cleaner. Do not use degreasing products, solvents or abrasive pastes.
MAIntenAnce
Before and after every use visually inspect the PowerSeat for traces of wear, damage or breakage. Refer to the
“Checking the device before use” paragraph for more detail on this inspection.
Every year, once a year send the device to the manufacturer or to an authorized Harken Service Center for a
complete inspection.
The first year, the device must be sent to the manufacturer within 12 months from the date of purchase. The
non-observance of such condition invalidates the warranty of the machine.
The maintenance must be recorded in the Maintenance Schedule.
Maintenance
Summary of Contents for POWERSEAT PWRS-G
Page 43: ...25 05 18 ENGLISH 43 ...