5
Radial Winch
40.2 PT BBB / CCC
Installation and Maintenance Manual - Mod.A
The winch can be installed following the
Procedure
below
:
Procedure
To install the winch you must remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 3.
1. Unscrew the central screw ( 2Nm/18 in-lb)
3. Lift off the drum n°21
2. Slide off the socket n°29 and the cover
n°27
