INSTALLATION INSTRUCTIONS
Use the HEX-headed screws listed as “F” in the equipment list, to mount the “L”
brackets to the profile of the lift, as shown in PICTURES 1A, 1B and 1C below:
Mount the lift to the ceiling using the suitable bolts/screws (NOT SUPPLIED) and verify that the
projector lift is perfectly horizontal using a sprit level. Use shims to level the lift, if required, between
the brackets and ceiling.
Installing the lift perfectly level is IMPORTANT and ensures silent movement of the lift without any
shaking, jolting or friction that would compromise the alignment between projector and projection
screen.
