- 6 -
2.2 Rear panel
(HB115B MK III rear panel)
(HB3000BT rear panel)
valid for both models:
MAINS IN
mains voltage supply input (AC220-230V~/50Hz)
ON / OFF
mains switch
GROUND LIFT
when pressing this button, the signal’s ground is
directly connected to earth. In certain situations
this may reduce hum noise
LINE OUT
connect additional power amps here
EFF. SEND
if you want to use an external effects device,
connect its input here
EFF. RET
to return the processed signal from the effects unit
DI OUT
this output provides the frequency corrected line
level signal to feed recording devices or mixing
consoles
valid for HB 115B MK III only:
PRE
this switch toggles the point where the DI OUT
signal is tapped. Press the button if you want the
DI OUT to provide the pre-effects signal. Release
the button if you want the DI OUT to provide the
post-effects signal
SPEAKER OUT
power amp output for speaker connection
(200 watts, 4 ohms minimum impedance)
HORN OFF
to switch the internal horn speaker on or off
valid for HB 3000 BT only:
SPEAKER OUT
power amp output for speaker connection
(300 watts, 4 ohms minimum impedance)
Summary of Contents for HB 3000 BT
Page 1: ...1...
Page 10: ...10...
Page 11: ...11...
Page 12: ...12 Contact Musikhaus Thomann Treppendorf 30 96138 Burgebrach Germany www thomann de...
