www.thomann.de
Harley Benton Bass-Guitar Kit P-Style
5
Assembling of tuners
Before attaching the neck to the body, fit the tuning machine-heads to the headstock by setting a washer and
inserting the thread through the pre-drilled holes and bush over it. Screw down the bush onto the thread until
it fits tightly to the touch and then adjust the rear of the machine-head so that the tuning button sits vertically
above the top edge of the headstock.
Fix the retaining screw through the loop on the rear of the gear housing into the pilot hole to hold the tuner
in position. Tighten the nut on the front face of the tuner until it is firm by using a spanner of the correct size.
Repeat this for the remaining three tuners and then fit the string tree.