Connections
3
AVR
Connect Your Speakers
How to use the AVR speaker terminals:
Always connect the colored (+) terminal on the AVR to the (+) terminal on the speaker
(usually red), and the black (–) terminal on the AVR to the (–) terminal on the speaker
(usually black).
IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or the
other terminal. Touching wires can cause a short circuit that can damage your receiver
or amplifier.
Connect the speakers as shown in the illustration.
Connect Your Subwoofer
Use a single RCA audio cable to connect the receiver’s Subwoofer Pre-Out connector to
your subwoofer. Consult your subwoofer’s user manual for specific information about
making connections to it.
Connect Your TV or Video Display
If your TV has an HDMI connector:
Use an HDMI cable (not included) to connect
it to the receiver’s HDMI Monitor Out connector. You do not need to make any other
connections to your TV from the receiver or from any of your video source components.
If your TV does not have an HDMI connector:
Use a composite video cable (not
included) to connect the receiver’s Composite Monitor Out connector to your TV’s
composite video connector.
Note: The HDMI connection to your TV is preferred. If you use the composite video
connection to your TV, you will not be able to view the receiver’s on-screen menus.
1. Unscrew Cap
2. Insert Bare Wire
3. Tighten Cap
Receiver
Subwoofer
Connector
Powered
Subwoofer
Single
RCA Audio Cable
(not supplied)
Receiver
HDMI Monitor Out
Connector
TV
HDMI Cable
(not supplied)
Receiver
Composite
Monitor Out
Connector
TV
Composite Video Cable
(not supplied)