background image

8

FRONT-PANEL INFORMATION DISPLAY

L

Time Indicator:

This indicator lights in con-

junction with one of the time indicators 

OPQ

to show which of the time status modes is
active.

M

Remaining-Time Indicator:

This indicator

lights when the Information Display 

K

shows

the time remaining on a disc.

N

Total Time:

This indicator lights when the

Information Display 

K

shows the total time of

all tracks on a disc.

O

Track Time:

This indicator lights when the

Information Display 

K

shows the running time

of the individual track being played.

P

R/RW Indicator:

This indicator shows which

type of recordable disc is present in the Record
Deck 

%

. When a CD-R disc is present, only the

R is lit. The RW lights when an erasable CD-RW
disc is in use.

Q

Play/Pause Indicator:

These indicators

show the status of the individual CD Decks. The

lights when the CD is playing, and the 

±

±

lights when the unit is in a Pause mode.

R

Sample-Rate Converter:

This indicator

lights when the Sample-Rate Converter is in use
to change the digital sample rate when the
incoming signal is not the standard 44.1kHz
used by standard CDs. This is an automatic func-
tion and does not require any user intervention.

S

CD Indicator:

This indicator lights when a

standard CD is playing in either deck 

3

or 

%

.

T

Record Indicator:

This indicator lights

when the unit is making a recording and flashes
during the preparations for recording.

U

Finalize Indicator:

This indicator lights

when the unit is in the Finalization process,
which is required before a CD-R disc may be
played on a standard CD machine. See page 22
for more information on Finalization.

V

Erase Indicator:

This indicator lights when

a CD-RW disc is being erased. Note that only
CD-RW discs may be erased; it is not possible to
erase a CD-R disc. See page 22 for more infor-
mation on erasing discs.

W

Auto Indicator:

This indicator lights when

the automatic method of incrementing tracks is
selected for a recording session.

X

Analog Indicator:

This indicator lights

when an analog source is being recorded.
See page 20 for more information on source
selection.

Y

Digital Indicator:

This indicator lights when

an digital source is being recorded. See page 20
for more information on source selection.

Summary of Contents for CDR 2

























Reviews: