RADIO MENU
39
ENGLISH
4. Pressing the search
G
/
H
button
HJ
will scan the FM band for the first available
radio station with acceptable reception. The
scan will stop once a station is found and the
name of the station will be displayed (as long
as RDS is transmitted by the station).
The station will be stored automatically in the
current preset.
If you know the frequency of your station, you
can also tune the frequency directly with the help
of the numeric keys of the remote control. Move
the cursor to the end of the station line and press
the frequency with the numeric keys.
5. Move the cursor to the next station line in the
menu. Follow the directions in step 3 and in
the Upper Menu Line to store all your radio
stations in the tuner’s memory.
Rearranging the station list
Once all the stations have been stored in the
memory, you can rearrange the station list, put-
ting your favorite stations on top of the list.
1. Move the cursor in the left column in the sta-
tion list to the first station you would like to
rearrange.
2. Press Enter
6
to activate the current station.
The cursor will move to the Lower Menu Line
of the screen.
3. Select the desired preset from the list by mov-
ing the cursor right or left. Press Enter
6
to
activate the change. The cursor will move back
to the new station line.
4. Repeat step 3 until all radio stations have
been rearranged according to your prefer-
ences.
Selecting presets
Once rearranged, presets can be chosen at any
time (except cursor is on frequency row) by
pressing the numeric key corresponding to the
preset you would like to listen to. Depending on
whether the RDS function is active, the station
name will show on the front panel Information
Display.
Pressing the Previous/Next
I
/
J
Button
EF
or the PRESETS Up/Down Buttons
L
will select the previous or next radio station.
Presets can also be chosen in the Radio Menu.
Move the cursor to the preset you would like to
listen to and press Enter
6
to activate. An
arrow in front of the preset will light to show the
active radio station. The cursor can be moved
around the menu without changing the current
radio station. Pressing the Previous/Next
I
/
J
Button
EF
at any position in the menu will
select the previous or next radio station, that is
for instance from preset 3 to preset 4, even if the
cursor is highlighting preset 11. Pressing the Play
button will always return the cursor to the cur-
rent station played, no matter were it was previ-
ously (even when another menu is open).
Removing presets
If you wish to remove presets from your preset
list, follow the steps below.
1. Move the cursor in the left column in the sta-
tion list to the preset you would like to
remove.
2. Press Enter
6
to activate the current station.
The cursor will move to the Lower Menu Line
of the screen.
3. Select Remove from the list and press Enter
6
. The cursor will move back to the original
station line.
4. Repeat step 3 until all radio stations you
would like to delete have been removed.
Auto Preset function
When the cursor is moved to the " # " icon on top
of the preset numbers you can activate the Auto
Preset function, clear the complete frequency list
or restore all default frequencies set by the factory.
When the Auto Preset is selected the tuner will
scan the full FM range and store all stations with
acceptable reception one after another on the
presets. The frequency scanned will appear on
the left lower side of the menu, while the fre-
quency of each station stored will be shown on
the right side of the list. When the complete FM
range is scanned or all presets (30) are loaded
with stations the scan will stop and the first pre-
set be selected.
You also can stop the scan at any time by pressing
the STOP button
I
. Stations can be rearranged
by following the explanations in the chapter
"Rearranging the station list" on page 39.
RDS Station ID
With the help of RDS (Radio Data System) you
can show the name of the station you are cur-
rently listening to as well as the station names of
all other presets.
The RDS function is set to active by default,
shown by the light blue RDS icon at the left of
the menu. In this mode, all station names will be
visible both on the OSD menu as well as on the
Information Display on the front panel.
If the RDS function on the left side of the menu is
inactive (dark blue), you will only see the frequen-
cy of the current preset shown in the menu and on
the front panel display. The Station Name line on
top of the menu will disappear, but the name of all
other stations preset will keep in the list.
Pressing STATUS
D
on the remote will change
the front panels display’s indication from the fre-
quency to the name of an RDS station or vice
versa and will simultaneously turn the RDS indi-
cation in the OSD on or off.
Surround Mode for Tuner
As with all other inputs of the Digital Lounge
DVD receiver, you can also select your preferred
surround mode when listening to the radio. The
actual surround mode is listed on the first line of
the tuner menu. Follow the steps below to
change the surround format:
1. Move the cursor to the AUDIO line on the top
of the tuner menu. The actual surround format
will be highlighted. Press Enter
6
to activate
the possible surround formats. These will be
shown in the bottom line of the menu.
2. Move the cursor right or left, until the desired
surround format is highlighted.
3. Press Enter
6
to activate the change. The
setting will apply to all tuner presets.
Note:
As with all other inputs of the DVD receiv-
er, the Audio mode can easily be selected by
pressing the AUDIO button
5
on the remote
repeatedly until the desired surround mode
appears in the first line of the OSD menu.
Radio Menu
0007CSK - DigitalLounge 632_640_646 ENG v11.qxp:0007CSK - DigitalLounge 632,640,646 UK 12/06/08 11:11 Side 39 (Sort/Black plade
