REMOTE CONTROL
45
ENGLISH
Remote Control
Erasing Learned Codes
The DL’s remote allows you to remove or erase the
code learned into a single button for a single
device, to remove or erase all the codes that have
been learned for a single device, or to erase all
commands that have been learned to all devices.
To erase a single learned code from with-
in a single device’s settings, follow these
steps:
1. Press the
Learn Button
P
and the Device
Selector Button (in the System On group
0
)
together until the device button light remains on.
2. Release the buttons.
3. Press and release the
Device Selector
0
again for the device within which the individual
button to be erased has been programmed.
4. Press the
7
button
three times.
5. Press and release the individual button for
which the code is to be erased. The
Device/
System
On button blinks three times to confirm.
6. To erase other buttons within the same
device, press them as noted in Step 5.
7. When all buttons to be erased have been
pressed, press the
Learn
button
P
to
complete the process.
NOTE:
When the learned code has been erased,
the button returns to the original code.
To erase all codes within a single device,
follow these steps:
1. Press the
Learn
button
P
and the
Device
Selector Button (in the System On group
0
together until the device button light remains on.
2. Release the buttons
3. Press the same Device/System On Button again.
4. Press the
8
Button
three times.
The Device Button blinks three times and goes
out. You are done.
NOTE:
When the learned codes for a device are
erased, all codes for that device return to the
original code.
To erase all codes within all devices, fol-
low these steps:
1. Press the Learn button
P
and any of the
Device Selector Buttons (in the System On group
0
) together, until the device button light
remains on.
2. Release the buttons
3. Press the same Device/System On Button
again.
4. Press the
9
Button
three times.The
Device Button blinks three times and goes out.
You are done.
NOTE:
When all learned codes for all devices
are erased, all devices return to their original
codes.
Resetting the complete remote:
You may also do this very simple operation to
initialize the Remote to be returned to all factory
codes:
1. Press the TV Button in the System On group
and the
0
Button simultaneously.The TV
Button will light up.
2. Press the
3
Button
three times.
3. All the device buttons blink three times. You
are done.
0007CSK - DigitalLounge 632_640_646 ENG v11.qxp:0007CSK - DigitalLounge 632,640,646 UK 12/06/08 11:11 Side 45 (Sort/Black plade
