CD PLAYBACK
3. When the TIME section is highlighted, press the
K
Navigation Button
9
to view the time remain-
ing on the track (T-REMAIN). Press again to view
elapsed time of the disc (D-ELAPSED). Press
again to view the time remaining for the disc
(D-REMAIN).
4. If you press the
Enter Button
9
while the Time
display is highlighted, the player displays SET TIME.
With the
Numeric Keys
, you can enter an
exact time from which you wish the disc to play,
then press the
Enter Button
9
or the
Play
Button
3
G
to start playback from the selected
point on the disc.
• To change the front-panel time display while a CD is
playing without a TV screen, press the
M
Navigation
Button
9
twice. Press the
L
Navigation Button
9
repeatedly to change time display: track time
elapsed – track time remaining – disc time elapsed
– disc time remaining.
Repeat Play
With CDs the DVD 25 offers three Repeat functions
that allow you to take advantage of the capacity of the
unit for unattended playback:
•
Repeat Disc:
Plays the complete disc repeatedly
from start to finish until the disc is manually stopped.
When that mode is selected,
REPEAT ALL
H
will
appear in the front-panel display, and REPEAT DISC
will appear on-screen.
•
Repeat Track:
Repeats the CD track currently being
played until the disc is manually stopped. When that
mode is selected,
REPEAT 1
H
will light up in the
front-panel display, and REPEAT TRACK will appear
on-screen.
•
Repeat A-B:
Repeats any selected portion of the
disc until the disc is manually stopped.
To select any Repeat mode, do the following:
1. While a disc is playing, press the
Repeat Button
on the remote; the Repeat Display appears.
2. Access the Repeat modes and their appropriate
menus in the following order by pressing the
Repeat Button
on the remote repeatedly until
the desired function is displayed. REPEAT TRACK
➜
REPEAT DISC
➜
REPEAT OFF
3. To make the menu disappear from the screen, press
the
Clear Button
on the remote or wait a few
seconds.
• To cancel any Repeat Play function and to continue
with normal play, press the
Repeat Button
until the Repeat Off banner appears in the on-screen
display or the
REPEAT Indicator
H
in the
Front-Panel Information Display goes out.
• Repeat Play may be stopped and canceled by
pressing the
Stop Button
5
I
twice.
• With CD, all Repeat modes are also available during
Program play (see page 30). If Repeat All is selected
during Program play, the complete program will be
repeated rather than the disc.
A-B Repeat Play
The Repeat A-B function allows you to select any
portion of a CD and have it repeat continually until the
unit is manually stopped.
To initiate a Repeat A-B playback sequence, follow
these steps while a disc is playing:
1. While a disc is playing, press the
A-B Button
on the remote when you want to choose a passage
as the beginning point. The Repeat A– Display
appears and
REPEAT A–
K
is indicated in the
front-panel display.
2. Press the
A-B Button
again to choose the
end of the passage. REPEAT A–B will appear on the
screen and in the front-panel display. Repeat A-B is
set and the A-B section will be played continuously.
3. Press the
A-B Button
on the remote again so
that the
REPEAT A-B Indicators
K
disappear and
REPEAT OFF appears on the screen to cancel the
Repeat A-B mode and to play on in normal mode.
4. To make the menu disappear from the screen, press
the
Clear Button
on the remote or wait a few
seconds.
NOTE:
The A-B Repeat range may cover several
tracks on the CD.
Random Play
The Random Play function will play all of the tracks on
a CD in a random order as selected by the DVD 25.
Once the DVD 25 has played all of the tracks on the
disc, it will stop.
1. While the disc is in Stop or Resume mode, press
the
Random Button
O
on the remote. The
PROGRAM EDITOR will appear and the
RANDOM
Indicator
J
will light in the front-panel display.
The Playlist shows the order in which tracks will be
played.
2. Press the
Play Button
3
G
to begin random
playback. The Program Editor on the screen will be
replaced by the normal Banner Display.
3. To make the Banner Display disappear from the
screen, press the
Clear Button
on the remote.
NOTE:
Random Play can also be started or canceled
when the DVD 25 is in Play mode (without the
Program Editor appearing) by pressing the
Random
Button
O
. Random Play cannot be canceled during
Stop or Resume mode by pressing the
Random
Button
O
again. This must be done during play.
Video Off Feature
During CD playback, some listeners may prefer to turn
off the DVD 25’s video circuitry. Although the video
section is electrically isolated from the audio section,
some users may prefer to turn the video displays off
during audio playback to prevent any possibility of
interference between audio and video. You may also
wish to turn the video display off if you find the menu
system distracting or unnecessary during CD playback.
To turn the video displays off while a CD is playing,
simply press the
Video Off Button
Q
. Press the
button again to restore the video output. Note that the
video output will automatically be restored each time
the DVD 25 is turned on.
CD PLAYBACK 29
