background image

8

FRONT-PANEL INFORMATION DISPLAY

FRONT-PANEL INFORMATION DISPLAY

A

Playback Mode Indicators

B

Disc Type Indicators

C

Program Indicator

D

Random Indicator

E

VCD Playback Control Indicator

F

Repeat Indicators

G

V-OFF Indicator

H

A-B Repeat Indicator

I

Angle Indicator

J

Progressive Scan Indicator

K

Test Signal Indicator

L

Parental Lock Indicator

M

Time Indicators

N

Chapter/Track Indicators

O

Group/Title Indicators

A

Playback-Mode Indicators:

These indicators

light to show the current playback mode:

Lights when a disc is playing in the normal mode.

››› 

When the DVD 31 is in the Fast Search play

mode, two or three of these indicators will light to
show that the unit is in a Fast Play mode, depending
on the speed.

±

Lights when the disc is paused.

‹‹

Lights when the disc is in the Fast Search

Reverse mode.

B

Disc Type Indicators:

These indicators will light

to show the type of disc or program material being
played.

C

Program Indicator:

This indicator lights when the

programming functions are in use.

D

Random Indicator:

This indicator lights when the

unit is in the Random Play mode.

E

VCD Playback Control Indicator:

This indicator

lights when the Playback Control function is turned on
with VCDs.

F

Repeat Indicators:

These indicators light when

any of the Repeat functions are in use.

G

V-OFF Indicator:

This indicator lights in red when

the unit's video output has been turned off by pressing
the V-OFF button on the remote control.

H

A-B Repeat Indicator:

This indicator lights when

a specific passage for repeat playback has been
selected.

I

Angle Indicator:

This indicator blinks when 

alternative viewing angles are available on the 
DVD currently playing.

J

Progressive Scan Indicator:

This indicator lights

when the unit sends out a progressive scan signal.

K

Test Signal Indicator:

This indicator lights when

the test pattern signal is in use.

L

Parental Lock Indicator:

This indicator lights

when the parental-lock system is engaged in order to
prevent anyone from changing the rating level without
a code.

M

Time Indicators:

These positions in the indicator

will show the running time of a DVD in play. When a
CD is playing, these indicators will show the current
track time, time remaining in the current track, or the
total remaining time on the disc.

NOTE:

The indicators 

MNO

will also display 

text messages about the DVD’s status, including

Reading

when a disc is loading,

Standby

when the unit is turned off, and 

Disc Error

when a disc not compatible with the DVD is put 
into play.

N

Chapter/Track Number Indicators:

When a

DVD disc is playing, these two positions in the display
will show the current chapter. When a CD disc is play-
ing they will show the current track number.

O

Group/Title Indicators:

When a DVD-Video disc

is playing, these two positions show the current title.
When a DVD-Audio disc is playing, they show the cur-
rent group.

NOTE:

To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support 

section for this product at www.harmankardon.com.

DVD 31 (120V) OM  6/25/04  11:40 AM  Page 8

Summary of Contents for DVD 31

































Reviews: