ENGLISH
6. Press the PLAY/PAUSE button.
• If you want continuous play
without clearing your programmed
selection during programmed
play, select the desired disc with
the DISC SELECTOR or DISC
SKIP button(s) then continuous
play starts from the first track of
that disc.
• If you want programmed play
again, press the PROGRAM/
REVIEW button in stop mode,
then the unit switches to program
mode.
CHECKING
THE PROGRAMMED SELECTIONS
You can check the programmed
selections during programming or
after completion of the program.
• Each time the PROGRAM/REVIEW
button is pressed, the
programmed selections will
appear in the programmed
sequence.
RECTIFYING ANY WRONGLY
PROGRAMMED SELECTION
When you made a mistake and
programmed the wrong selection,
you can rectify it as follows.
Example: When tracks 3, 4 and 7 of
the first disc are programmed, if you
want to program track 7 of the 5th
disc instead of track 4 of the first
disc:
1. Find track 4 of the first disc with
the PROGRAM/REVIEW button by
continuing to press the review button
until that selection appears on the
display.
2. Select your desired disc with the
DISC SELECTOR or DISC SKIP
button(s).
Only the number that corresponds to
that disc appears.
3. Select your desired track with the
FORWARD or BACKWARD SKIP
button.
9
4. Press the PROGRAM/REVIEW
button.
CLEARING THE
PROGRAMMED SELECTIONS
• Each time the STOP/CLEAR
button is pressed during program-
ming or after completion of
programming, the programmed
selections are cleared one by one
in the opposite sequence.
• If you want to clear a specific
selection, find that selection with
the PROGRAM/REVIEW button
and clear it with the STOP/CLEAR
button.
• By pressing the OPEN/CLOSE or
STOP/CLEAR button over 4
seconds in stop mode, all pro-
grammed selections will be
cleared.
PROGRAM
1
2
3
4
5
TRACK
MIN
SEC
:
4
7 9
11
PROGRAM
1
3 5
7
TRACK
SEC
PROGRAM
5
PROGRAM
5
TRACK
7
PROGRAM
1
2
3
4
5
TRACK
3
7
SEC
PROGRAM
5
TRACK
7
SEC
PROGRAM
5
TRACK
7
SEC
MIN
After a few seconds
After a few seconds
3. Select the track with the FOR-
WARD or BACKWARD SKIP button.
Example: When you select the 4th
track.
• When the track of the current disc
is selected, the track can be
selected directly without selecting
the disc.
4. Press the PROGRAM/REVIEW
button.
• Because it is impossible to know
the playing time of each selection
from five discs, --:-- can appear
on the time display.
• 5. Repeat steps 2, 3 and 4 to
complete programming.
PROGRAM
1
TRACK
4
PROGRAM
PROGRAM
1
1
TRACK
TRACK
MIN
MIN
SEC
SEC
After about 1 second
4
4
1
2
3
4
5
TRACK
MIN
SEC
:
After a few seconds
4
After about 1 second
FL8300 Engelsk
12/01/98, 16:38
12
