ENGLISH
4
Rear Panel Connections
• Before making connections first
turn off the unit.
• See the connection diagram in the
operating instructions manual of
Harman Kardon compatible
amplifier or receiver.
1. CONNECTION CORDS
You will have two leads from this
unit to connect to amplifier or
receiver. One lead (WHITE) carries
the LEFT channel signal and should
be connected to the LEFT of CD (or
AUX) input of amplifier or receiver.
The other lead (RED) should be
connected to the RIGHT of CD (or
AUX) input.
2. AC INPUT CORD
Plug this cord into the switched AC
outlet of amplifier or receiver or a
household AC outlet.
3. SYSTEM REMOTE
CONTROL CORD
The remote control input jack allows
remote control of this unit via a
cable. This cable can be connected
to the remote control output jack of
another Harman Kardon product.
Alternatively, it can be connected to
an accessory device that converts
infrared remote control signals into
detected pulses. While all Harman
Kardon products with remote control
jacks are compatible with one
another, not all accessory devices or
other manufacturer’s products are.
However, it is safe to experiment.
4. DIGITAL OUT
Coaxial digital out, RCA connector.
4
3
2
1
FL8300 Engelsk
12/01/98, 16:37
7