9
Remote Control Functions
a
Disc-Select Buttons:
Press one of these
buttons to select the disc in a specific position
in the CD drawer.
b
Numeric Buttons:
Press these buttons to
select a specific track on a disc. The FL 8380
will immediately go to the track and begin to
play it. These buttons are also used to enter
track numbers into the memory for prepro-
grammed-play lists. (See page 13 for complete
information on programming the FL 8380.)
c
Clear Button:
Press this button to
remove tracks from a programmed sequence.
Each press of the button will remove one track,
starting with the last track programmed to play.
(See page 13 for complete information on pro-
gramming the FL 8380.)
d
Search Buttons:
Press these buttons
to search forward
—
or backwards
‚
through a disc to locate a particular portion of
the selection being played.
e
Skip Buttons:
Press one of these buttons
to move to the next track
—Í
or to move back
to the previous track
Í‚
on the disc being
played.
f
Stop Button:
Press this button to stop the
disc currently being played.
g
Play Button:
Press this button to start
the playback of a CD. If the CD drawer is open,
pressing this button will automatically close the
drawer.
h
Random Button:
Press this button to
play all of the tracks on a disc in a random
order. (See page 11 for more information.)
i
Pause Button:
Press this button once to
momentarily pause a disc. When the button is
pressed again, the disc will resume play from the
point at which it was paused.
j
Program Button:
This button is used to
program the playback of a disc in a particular
order. (See page 13 for complete instructions on
programming the FL 8380.)
k
Time Button:
In normal operation, the
display will show the running time of the track
being played. Press the button once to check
the time remaining for the track in play. Press
the button again to view the total play time
remaining for the disc in play.
l
Intro Button:
Press this button to put the
FL 8380 into the Intro Scan mode. When you
press this button, the unit will play the first 10
seconds of each track on the disc, and then move
to the next track. Press the button again to defeat
the function and continue full play of the current
track. (See page 12 for more information.)
m
Repeat Button:
Press this button once to
continuously repeat the track currently being
played. Press it a second time to repeat the entire
disc. (See page 13 for more information.)
n
Disc Skip Buttons:
Press these buttons to
change to the next disc. If a disc position is empty,
the FL 8380 will automatically search for the next
position that contains a disc.
o
Power On Button:
When the FL 8380 is
plugged into an active AC outlet, press this button
to turn the unit on. The
Status Mode Indicator
2
will turn green. If the unit is plugged into a
switched outlet, power must be applied to the
switched outlet in order for the
Power On
button
o
to be effective.
p
Power Off Button:
Press this button to
turn the unit off; the
Status Mode Indicator
2
will turn amber, indicating that the unit is in a
Standby mode.
FL8380
Summary of Contents for FL 8380
