8
REAR-PANEL CONNECTIONS
REAR-PANEL CONNECTIONS
REAR-PANEL CONNECTIONS
8
REAR-PANEL CONNECTIONS
™
¢ ∞
£
¡
¡
AC Power Cord
™
Coaxial Digital Output
£
Remote Control Output
¢
Remote Control Input
∞
Analog Audio Outputs
¡
AC Power Cord:
Connect this plug to an AC outlet.
If the outlet is switch-controlled, make certain that the
switch is in the ON position.
™
Coaxial Digital Output:
Connect this jack to the
coaxial-digital input of a digital audio/video receiver or an
external digital-to-analog converter for direct access to
the digital signals of the FL 8385. DO NOT connect this
jack to the standard audio inputs of any device.
£
Remote Control Output:
Connect this jack to the
input of another compatible Harman Kardon remote
controlled device to have the remote sensor on the
FL 8385 provide signals to other products.
¢
Remote Control Input:
Connect the output of a
remote infrared sensor or the remote control output of
another compatible Harman Kardon product. This will
enable the remote control system to operate even
when the front panel
Remote Sensor
$
is blocked.
It will also allow use of the FL 8385 with optional,
external control systems.
∞
Analog Audio Outputs:
Connect these jacks to
the analog CD audio inputs of your receiver, surround
processor or preamplifier.
NOTE:
To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at
www.harmankardon.com.
