4
5
General Setup
Unpack the
1.
Harman Kardon Go + Play II system.
Place the appropriate nest into the docking station.
2.
IMPORTANT: Turn the adjustable knob in the center of the docking station to match your
3.
specific iPhone/iPod model.
Place the
4.
iPhone/iPod into the docking station.
Connect the power supply into the
5.
“DC In jack”.
Plug the adapter into the wall outlet.
6.
If using batteries is preferred, install eight (8) type D batteries into the bottom of the unit
7.
.
Smart Remote
storage
compartment
DC In
USB
S-Video
Auxiliary In
Storing Your Smart Remote
The Harman Kardon Go + Play II system is equipped with a storage compartment on the back of
the unit. Simply press the compartment to open it and store your remote.
Battery Installation
Unscrew the two battery compartment cover screws counterclockwise to the unlocked
1.
position; remove the battery compartment cover.
Place eight (8) fresh C-cell batteries as shown.
2.
Replace the battery compartment cover.
3.
Note: System will not use battery power when using AC power.
1.
2.
3.
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT
Battery Disposal
Alkaline batteries are considered nonhazardous. Rechargeable batteries (i.e., nickel cadmium,
nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and
may pose an unnecessary health and safety risk.
In the European Union and other locations, it is illegal to dispose of any battery with household
trash. All batteries must be disposed of in an environmentally sound manner. Contact your local
waste management officials for information regarding the environmentally sound collection,
recycling and disposal of used batteries.
0170CSK - HK Go+Play II v5.indd 4
01/12/09 11:36:45
