14
REPEAT PLAY OPERATION
Repeat Play Operation
Repeat Play
The HD750’s programming system enables you
to repeat either a single track, the entire disc
(respectively all programmed tracks) or a special-
ly programmed passage that you select.
Repeat One Track
To repeat the track in play, press the
Repeat
button
5
!
once. When the unit is in Stop
mode, press
Repeat
once, select the track to be
repeated with the
Skip
or
Numeric
buttons as
described on page 10, and press
Play
4
9
.The
REPEAT
and
1
indicators will light and
the track will continue to play over and over
again continuously. If the track is changed by
pressing the
Skip
buttons
7
7
while the
Repeat function is in use, the newly selected
track will be repeated. To stop the repeat play,
press the
Stop
button
5
A
or press the
Repeat
button
$
5
until the
REPEAT
indica-
tor goes out.
Repeat All Tracks
To repeat all of the tracks on a disc, press the
Repeat
button
5
$
until the
REPEAT
and
ALL
indicators light up. When you see these indi-
cators, the entire disc or all programmed tracks
will play through to the end, and then start
again from the beginning. The disc will play con-
tinually until the
Stop
button
5
A
is
pressed.
Repeat A–B
The HD750 may be programmed to repeat any
section within a track, or a complete passage or
program that includes material in a series of
tracks.
To program the unit for A–B play, first locate the
point on the disc where you wish to begin the
repeated section. At that point, press the
Repeat
A–B
button
6
. The
REPEAT
indicators will
light in the
Information Display
and an
A–
indicator to show that the program process
has started. Let the disc continue to play or
press the
Search
—
button
6
8
or
Skip
fl·
button
7
7
on the front or remote
until you have reached the end of the section to
be repeated. When the end point is reached,
press the
Repeat A–B
button
6
again. Note
that the
REPEAT
and
A–B
indicators will now be
illuminated.
Once the
Repeat A–B
button
6
is pressed
for the second time to complete the program-
ming, the HD750 will automatically go to the
beginning of the selected passage and continue
to play the section over and over.
To resume normal play press the
Repeat A–B
button
6
again. The
REPEAT
and
A–B
indica-
tors will go out, and the rest of the disc will play
normally.
IMPORTANT Note:
Tracks programmed as
described before in chapter ”Programmed Play”
can be repeated too: When you press
Repeat
!
6
once after a program is created (the
PROGRAM
indicator must be lit, otherwise press
Program
) and the program step indication
P - 01
is not lit (otherwise press
Stop
once),
the
REPEAT 1
indicator will light and the track
currently selected or playing will be repeated
continuously. If
Repeat
is pressed twice
REPEAT
ALL
will be displayed, all programmed tracks will
be played subsequently and the sequence will be
repeated continuously until
Stop
is pressed.
