TECHNICAL SPECIFICATIONS
17
Technical Specifications
Audio Section
Stereo Mode
Continuous Average Power (FTC)
70 Watts per channel, 20Hz –20kHz
@ < 0.07% THD, both channels driven into 8 ohms
95 Watts per channel, 20Hz –20kHz
@ < 0.2% THD, both channels driven into 4 ohms
Input Sensitivity/Impedance
Linear (High Level)
200mV/47kohms
Signal-to-Noise Ratio (IHF-A)
95dB
Frequency Response
@ 1W (+0dB, –3dB)
10Hz –110kHz
High Instantaneous
Current Capability (HCC)
±42 Amps
Transient Intermodulation
Distortion (TIM)
Unmeasurable
Rise Time
16 µsec
Slew Rate
40V/µsec
FM Tuner Section
Frequency Range
87.5–108MHz
Usable Sensitivity
IHF: 1.12 µV/13.5dBf
Signal-to-Noise Ratio
Mono/Stereo: 73/72dBA (DIN)
Distortion
Mono/Stereo: 0.3/0.4%
Stereo Separation
40dB @ 1kHz
Selectivity
±400kHz, 65dB
Image Rejection
>80dB
IF Rejection
>100dB
AM Tuner Section
Frequency Range
520 –1710kHz
Signal-to-Noise Ratio
>40dB
Usable Sensitivity
Loop: 500µV/M
Distortion
1kHz, 50% Mod: 0.8%
Selectivity
±10kHz: >25dB
General
Power Requirement
AC 230V/50Hz
Power Consumption
72W idle, 350W maximum
(both channels driven)
Dimension (Max)
Width
442mm
Height
156mm
Depth
415mm
Weight
11.2kg
Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman Kardon, Inc.
