9
PL0004-01001
+
–
+
–
+
–
+
–
+
–
LEFT
LINE-LEVEL
OUTPUTS
L
R
+
–
+
–
+
–
+
–
+
–
+
–
+
–
RIGHT
SURROUND
FRONT
CENTER
Left Front
Right Front
Left
Surround
Right
Surround
Center
Subwoofer
Receiver
RCA Cable
(Not Supplied)
(Red and White Ends)
Surround Left
Speaker Cable
(Blue Bands)
Front Left
Speaker Cable
(White Bands)
Front Right
Speaker Cable
(Red Bands)
Center
Speaker Cable
(Green Bands)
Surround Right
Speaker Cable
(Gray Bands)
Connecting the Subwoofer to a Receiver
or Preamp/Processor With Line Outputs
Use this installation method for receivers and preamp/processors that
do not have a dedicated subwoofer output, but do have preamp-level
(volume-controlled) line outputs. If the receiver or preamp/processor
has a dedicated subwoofer output with low-pass filtering, see
Connect-
ing the Subwoofer to a Receiver or Preamp/Processor With a Dedicated
Subwoofer Output
, on page 8.
If you’re connecting to a receiver with left and right line outputs that
are not connected to amplifier inputs, connect the LFE (purple) connec-
tor of the supplied combination LFE and trigger cable to one of those
outputs and to either of the HKTS200SUB’s
Line-Level L/R In Con-
nectors
. Use a second RCA cable (not supplied) to connect the other
receiver or preamp line output to the other of the HKTS200SUB’s
Line-
Level L/R In Connectors
.
If you’re connecting to a receiver or preamp/processor with left and
right line outputs that are connected to amplifier front left and right
inputs, connect the single ends of Y-adapters (not supplied) to
the receiver’s or processor’s left and right line outputs. Connect one
of the Y-adapter’s double ends to the HKTS200SUB’s
Line-Level L/R
In Connectors
, and connect the other double end to your
amplifier’s front left and right inputs.
Connect each satellite speaker and the center speaker to the
corresponding speaker terminals on your receiver or amplifier.
In your receiver or preamp/processor’s setup menu, configure it for
Subwoofer ON
, and set the front left, front right, center, and surround
speakers to
Small
.
After you have made and verified all connections, plug the
HKTS200SUB’s AC Power Cord into an active AC outlet.
7
7
7
9
Harman Kardon
HKTS 20+30+60 Service Manual
Page 20 of 49
Summary of Contents for HKTS 20
