background image

5

HKTS 35BQ 

Speaker Placement (cont.)

Surround Speakers

Front Right 

Speaker

Center 

Speaker

Front Left 

Speaker

Surround Right 

Speaker

Surround Left 

Speaker

5 – 6 ft 

(1.5m – 1.8m)

The two surround speakers should be placed slightly behind the listening position, facing 

each other, and, ideally should be 5 – 6 feet (1.5m – 1.8m) from the floor. An alternate 

location would be on a wall behind the listening position, facing forward. The surround 

speakers should not call attention to themselves while they’re playing. Experiment with 

their placement until you hear a diffuse, ambient sound accompanying the program 

material heard from the front left, front right and center speakers.

Subwoofer

1.

2.

3.

The performance of a subwoofer is directly related to its placement in the listening room 

and its physical position relative to the other speakers in the system. While it is true 

that in general our ears do not hear directional sounds at the low frequencies where 

subwoofers operate, when installing a subwoofer within the limited confines of a room, 

the reflections, standing waves and absorptions generated within the room will strongly 

influence the performance of any subwoofer system. As a result, the specific location of 

the subwoofer in the room does become important to the amount and quality of bass 

that is produced.
For example, placing the subwoofer next to a wall generally will increase the amount of 

bass in the room; placing it in a corner (1) generally will maximize amount of bass in the 

room. However, corner placement can also increase the destructive effect of standing 

waves on bass performance. This effect can vary depending on the listening position – 

some listening positions may yield very good results while others may have far too much 

(or too little) bass at certain frequencies.
In many rooms, placing the subwoofer along the same plane as the left and right 

speakers (2) can produce the best integration between the sound of the subwoofer and 

that of the left and right speakers. In some rooms, the best performance could even result 

from placing the subwoofer behind the listening position (3).
We  strongly  recommend  that  you  experiment  with  placement  before  choosing  a  final 

location for your subwoofer. One way you can determine the best location for the 

subwoofer is by temporarily placing it in the listening position and playing music with 

strong bass content. Move around to various locations in the room while the system is 

playing (putting your ears where the subwoofer would be placed), and listen until you find 

the location where the bass performance is best. Place the subwoofer in that location.

Summary of Contents for HKTS 35BQ













Reviews: