Harman Kardon HS 200 Service Manual Download

Page: 4 / 76

REAR PANEL CONNECTIONS

ENGLISH

Rear Panel Connections

Composite Video Output

S-Video Output

Component Video Outputs

Scart TV Output

AC Power Cord

FM Antenna

Audio In

Subwoofer Output

Coaxial Digital Input

Optical Digital Input

Analog Audio Outputs

Front Speaker Outputs

Remote IR Input

TV Audio In

Coaxial Digital Output

Subwoofer Trigger Output

USB On-The-Go Input

HDMI Output

Remote IR Output

Composite Video Output:

Connect this

jack to the video input on a television or video
projector.

S-Video Output:

Connect this jack to the S-

Video input on a television or video projector.

Component Video Outputs:

These outputs

carry the component video signals for connection
to display monitors with component video inputs.
For standard analog TV's or projectors with
inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these
outputs to the corresponding inputs. If you have
a high-definition television or projector that is
compatible with high scan rate progressive video,
connect these jacks to the “HD Component”
inputs. Note that if you are using a progressive
scan display device, then ”Progressive” must be
selected in the Video Set-up Menu in order to
take advantage of the progressive scan circuitry.
See page 20 for more information on progressive
scan video.

IMPORTANT:

These jacks should NOT be con-

nected to standard composite video inputs.

SCART OUT (TV):

If your TV has a SCART

socket, you can connect a SCART cable to your
TV and to your DVD Player for improved video
quality. The SCART cable carries both audio and
video. You can select Composite Video or RGB
video for that SCART connector’s video output
signal.

AC Power Cord:

Connect this plug to an AC

outlet. If the outlet is controlled by a switch,
make certain that it is in the ON position.

FM Antenna:

Connect to the supplied FM

antenna.

Audio In:

Connect to a line-level analog

audio source: TV, tape player, Minidisc, PC, etc.

Subwoofer Output:

Connect to the

SUB/LFE input on the subwoofer.

Coaxial Digital Input:

Connect the coax

digital output from a DVD player, HDTV receiver,
LD player, MD player, satellite receiver or CD
player to this jack. The signal may be either a
Dolby Digital signal, DTS signal or a standard
PCM digital source. Do not connect the RF digital
output of an LD player to these jacks.

Optical Digital Input:

Connect the optical

Analog Audio Outputs:

Connect these

jacks to the analog audio input on a TV set or
external audio system for analog audio playback
or to the RECORD/INPUT jacks of an audio
recorder for recording.

Front Speaker Outputs:

Connect these

outputs to the ma or – terminals on your
left and right speakers. In conformance with the
new CEA color code specification, the White ter-
minal is the positive, or "+" terminal that should
be connected to the red (+) terminal on Front
Left speaker with the older color coding, while
the Red terminal is the positive, or "+" terminal
that should be connected to the red (+) terminal
on Front Right speaker. Connect the black (–)
terminals on the HS to the black (–) terminals on
the speakers. See page 14 for more information
on speaker polarity.

Remote IR Input:

If the HS 200’s front-

panel IR sensor is blocked due to cabinet doors
or other obstructions, an external IR sensor may
be used. Connect the output of the sensor to
this jack.