Important Safety Instructions
FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two con ditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause un-
desired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off
and then on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to a different outlet so that the equip-
mentand receiver are on different branch circuits.
•
Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by Harman Con-
sumer, Inc., could void the user’s authority to operate the equip-
ment.
SOUNDSTICKS
®
III
FCC Regulations
3
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched, par-
ticularly at plugs, convenience receptacles and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Do not expose this apparatus to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily
operable.
18. Do not expose batteries to excessive heat such as sunshine, fire
or the like.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH WITH AN AR-
ROWHEAD SYMBOL,
WITHIN AN
EQUILATERAL TRI-
ANGLE, IS INTENDED
TO ALERT THE USER
TO THE PRESENCE
OF UNINSULATED
“DANGEROUS VOLT-
AGE” WITHIN THE
PRODUCT’S ENCLO-
SURE THAT MAY
BE OF SUFFICIENT
MAGNITUDE TO
CONSTITUTE A RISK
OF ELECTRIC SHOCK
TO PERSONS.
THE EXCLAMATION
POINT WITHIN AN
EQUILATERAL TRI-
ANGLE IS INTENDED
TO ALERT THE USER
TO THE PRESENCE OF
IMPORTANT OPERAT-
ING AND MAINTE-
NANCE (SERVICING)
INSTRUCTIONS IN
THE LITERATURE
ACCOMPANYING THE
PRODUCT.
