background image

An arrow at the far right of the bottom
line will indicate whether there are
more choices in the menu stack.

• A right-pointing arrow (

) tells 

you that you are at the start of the
options stack. Press the 

Preset Up

Button

on the front panel or the 

button on the remote to scroll down
through the available choices.

• Two arrows, one pointing in each

direction (

), indicate that you

are in the middle of the options
stack. Press the 

Preset Up

or

Preset Down Button

on the front

panel or the 

fi

/

fl

buttons on the

remote to scroll up or down through
the available choices.

• A left-pointing arrow (

) tells you

that you are at the bottom of the
options stack. Press the 

Preset

Down Button

on the front panel 

or the 

fl

button on the remote to

scroll up through the available
choices.

While a track is playing, the upper line
of both displays will continually scroll
the Song, Artist and Album informa-
tion. The lower line will show the
elapsed time of the current track on
the left, and the remaining time on the
right. The icon between the two time
displays will show the Play icon (

fl

)

when a track is playing and the Pause
icon (

±

) when playback is paused.

The play time and track information
will always be available in the front-
panel display. The on-screen display
will disappear from view after the time
period set in the Advanced Settings
menu in your receiver. If you wish to
change the on-screen display time,
follow the instructions shown in the

Advanced Features section of your
receiver’s owner’s manual. The on-
screen display will reappear at the start
of each new track to show you the
time and track information, and then 
it will disappear again to prevent
image retention, or “burn-in,” on 
CRT or plasma displays.

Basic Playback and Control 
of the iPod

• To pause playback at any time,

press the 

Tune Mode Button

on the front panel or the 

Pause

Button

(

±

) on the remote. Press it

again to resume playback.

• To skip forward to the next track,

press the 

Tune Up Button

on the

front panel or the 

Forward Search

flfl

Button

on the remote. Release

the button and press it again, or tap
it repeatedly to skip forward through
the available tracks.

• To skip back to the start of the cur-

rent track, press the 

Tune Down

Button

on the front panel or the

Reverse Search 

fifi

Button

on

the remote. Release the button and
press it again, or tap it repeatedly to
skip backward through the available
tracks.

• To fast-forward through a track while

it is playing, press and hold the

Tune Up Button

on the front panel

or the 

Forward Search 

flfl

Button

on the remote.

• To play in fast reverse through a

track while it is playing, press and
hold the 

Tune Down Button

on the

front panel or the 

Reverse Search

fifi

Button

on the remote.

• To display the menus that guide you

through track selection, press the

Tuner Band Selector (AM/FM)
Button

on the receiver’s front panel

or the 

Menu Button

on the remote.

• To navigate the menus, scroll for-

ward using the 

Preset Up Button

on the receiver’s front panel or the

fl

Button

on the remote. Scroll

backward using the 

Preset Down

Button

on the receiver’s front panel

or the 

fi

Button

on the remote.

Press the 

Set Button

on either the

front panel or the remote to select
the current entry.

Charging the iPod

You may leave your iPod in The Bridge
even when you are not using it as a
playback source. Whenever the iPod 
is docked and your receiver is turned
on, The Bridge will charge the battery
in the iPod.

Some Harman Kardon receivers 
allow you to select whether you wish
to have the iPod’s battery charge
when the receiver is turned off (in 
the “Standby” mode) by changing 
a setting in the Input Menu on the
receiver. Consult your receiver’s
owner’s manual to see whether your
receiver has this capability.

Removing the iPod 

To remove an iPod from The Bridge,
grasp the sides of the iPod and pull 
it straight up, away from The Bridge.
Depending on your iPod model and
the software version it is using, the
check mark may remain in the iPod’s
display for a few minutes before
returning the iPod to normal operation.
This is a function of the iPod’s soft-
ware and does not indicate a failure in
the iPod, The Bridge or your receiver.

4

Summary of Contents for THE BRIDGE









Reviews: