background image

Harman®  •  Absolute43-C Owner’s Manual_R9  •  2018 -___  •  06/20

5

3-90-00772C

WARNING

!

If  you  expect  that  small  children  or  vulnerable  adults 

may come into contact with this appliance, the following 

precautions are recommended:

•  Install a physical barrier such as:
  -  A decorative fire screen.
  -  Adjustable safety gate.

•  Never leave children alone near a hot stove, whether 

operating or cooling down.

•  Teach children to 

NEVER

 touch the stove.

•  Consider  not  using  the  stove  when  children  will  be 

present.

•  Use only specified components as replacement parts. 

Other components may not allow your stove to operate 

as it was intended.

Contact your dealer for more information, or visit: www.

hpba.org/safety-information

.

To prevent unintended operation when not using your 

stove for an extended period of time (summer months, 

vacations, trips, etc):
•  Unplug stove from receptacle.

Due to high temperatures, this stove should be placed 

away from traffic, furniture and draperies.
Children and adults should be alerted to the hazards of 

high surface temperatures and should stay away to avoid 

burns to the skin and/or clothing.
Young children should be carefully supervised when they 

are in the same room as the stove.

Clothing  and  other  flammable  materials  should  not  be 

placed on or near this stove.

Installation and repair of this stove should be done by 

a  qualified  service  person.  The  appliance  should  be 

inspected before use and at least annually by a qualified 

service person. More frequent cleaning will be required. 

It is imperative that control compartments and circulating 

air passageways of this stove be kept clean.

A. Appliance Safety

WARNING

!

THIS WOOD HEATER HAS A MANUFACTURER-SET 

MINIMUM LOW BURN RATE THAT MUST NOT BE 

ALTERED. IT IS AGAINST FEDERAL REGULATIONS 

TO ALTER THIS SETTING OR OTHERWISE OPERATE 

THIS WOOD HEATER IN A MANNER INCONSISTENT 

WITH OPERATING INSTRUCTIONS IN THIS MANUAL.

Important Safety and Operating Information 

Check building codes prior to installation.

•  Installation MUST comply with local, regional, state and 

national codes and regulations.

•  Contact local building or fire officials about restrictions 

and installation inspection requirements in your area.

CAUTION

!

DO NOT:

•  Install or operate damaged appliance
•  Modify appliance
•  Install other than as instructed by Hearth & Home 

Technologies

•  Operate the appliance without fully assembling all 

components

•  Overfire

•  Install any component not approved by Hearth & Home 

Technologies

•  Install parts or components not Listed or approved.
•  Disable safety switches
Improper installation, adjustment, alteration, service or 

maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified

installer, service agency or your dealer.

Connect the power cord into a 120 VAC, 60 Hz grounded 

receptacle. (A surge protector is recommended to protect 

the circuit board.) Be sure the polarity of the outlet the stove 

is plugged into is correct.

CAUTION

!

This appliance must be vented to the outside

WARNING

!

Risk of Fire, Explosion or Electric Shock! DO NOT use 

this appliance if any part has been under water. Call a 

qualified service technician to inspect the appliance 

and to replace any part of the control system which 

has been under water.

Summary of Contents for Absolute43-C



























Reviews: