Harman® • Advance Owner’s Manual_R38 • 1999 - ___ • 09/15
17
3-90-436168c
D. Glass Maintenance
The glass used in your stove is manufactured to exact standards to withstand the high heat of the fire, but like all glass, it
must be treated with common sense and care. Never slam the door shut or strike the glass with a heavy object. If the glass
is broken or damaged, do not operate the stove until it has been replaced.
Glass - Replacement
If the stove’s glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace
glass only with Harman
®
replacement glass;
do not use substitutes.
Carefully remove damaged glass, gasket material, and glass clips (set aside).
Install the self adhesive 1/4” gasket material around the front face of the glass. Set the glass panel and gasket gently onto
the door. Install the glass clips and tighten.
Glass - Cleaning
Sometimes it will be necessary to clean accumulated ash from the glass surface; allowing this ash to remain on the glass
for long periods can result in “etching” due to the acidity of the ash. Never clean the glass while it is hot, and
do not
use
abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner
specifically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.
Top Glass Clip
Side Glass Clip
Nuts
Btm Glass Clip
Side Glass
Window Gasket
Door Assembly
Nut
Nut
