Trouble Shooting
Problem
Possible Reason
How to Solve
No Sound:
Europe:
AKG Acoustics GmbH
Laxenburger Strasse 254
A1230 Vienna - AUSTRIA
Tel.: +43-1-86654-0
hotline
@
akg.com
USA:
AKG Acoustics, U.S.
8500 Balboa Blvd. Dock 15
Northridge, CA 91329, USA
Tel.: +1-818-920-3224
akgusatechsupport@harman.com
necessary.
Distortion:
Also read the transmitter and receiver manuals!
RISK OF DAMAGE
Please make sure that the piece of equipment your microphone will be
When scrapping the equipment, separate the case, circuit boards and cables and dispose all
components in accordance with local waste disposal rules.
The packaging of the equipment is recyclable. Dispose packaging in an appropriate containe.r
provided by the local waste collection/ recycling entity and observe all local legislation relating
to waste disposal environment and recycling
.
1. Power to mixer and/or
amplifier is off.
2. Channel or master fader
on mixer, or volume
control on amplifier is at
zero.
3. Microphone is not connected
to mixer or amplifier.
4. Cable connectors are
seated loosely.
5. Cable is defective.
6. No supply voltage.
1. Switch power to mixer or
amplifier on.
2. Set channel or master
fader on mixer or volume
control on amplifier
to desired level.
3. Connect microphone to
mixer or amplifier.
4. Check cable connectors
for secure seat.
5. Check cable and
replace if damaged.
6. Switch phantom power on
6a. Check cable and replace if
1. Gain control on the
mixer set too high.
2. Mixer input in overload
1. Turn gain control down CCW.
2. Connect a 10-dB preattenuation
pad between
microphone and mixer
